The Rear GravelHugger will fit most bike frame seat stays (with angles approx 40-55 degrees) and designed for tyres up to 50mm wide.
Designed to be attached to the bike with zipties as these afford the most secure way to fitting. The Rear GravelHugger can also be attached utilising hook and loop straps (sold separately) making removing and refitting quicker and reduce single use plastic waste. Helitape is supplied to protect the seat stays where the GravelHugger sits on the seat stays, ensure you use this tape, invisframe, electrical tape or similar are not sufficiently thick to protect your bikes paint and frame.
Suitable for 700c and 650b wheels Max tyre width 50mm (depending on wheel/tyre combination).
Weight approx 150g - Length 560mm -Width 55mm
Designed, made and packed in the UK from 99% recycled polypropylene, which of course can be recycled again.
All of our bikes are sent on a next day service. When your order ships, you will be sent a tracking link by email.
Every bike we sell is fully assembled and tested for safety by our trained mechanics. We then partly disassemble the bike and carefully re-pack to prepare for shipping.
Depending on the model, upon receipt, you may be required to straighten and tighten the handlebars, re-attach front wheel and attach the pedals. Please ensure that the pedals are greased and fitted correctly - the pedals will be marked L and R and have to be fitted to the left and right cranks respectively. Not every bike comes with pedals, please check when you are placing your order.
There is a guide in the box telling you which tools you will need and the steps to follow. This will require some degree of mechanical skill to put together and can need some minor adjustments. The less confident you are in this field the more we'd recommend having it checked over by a professional mechanic.
Please note: Manufacturers can sometimes change the specification of the products from time to time.